Pengaruh Variasi Dimensi Sirip Pada Displacer Sistem Pendingin Mesin Stirling Menggunakan Energi Surya Terkonsentrasi

Main Article Content

Moch. Zainul Achyak Purbo Suwandono Gatot Soebiyakto

Abstract

Energy needs in Indonesia are increasing day by day due to population growth and economic growth. To meet the increasing energy needs, it is necessary to develop a variety of alternative energies such as: biomass, solar energy, wind energy, water energy, which are still few that utilize One of the machines that use renewable energy is the Stirling motor. A stirling motor is a type of motor that has an external combustion engine that does not require much maintenance and does not emit a lot of pollutants because it only requires a source of thermal energy to run it. In other words, solar energy can also be utilized. The method developed is the use of solar energy which is concentrated by a parabolic reflector to the hot cylinder of the Stirling engine to convert heat energy into motion energy. The purpose of this study was to determine the effect of variations of several fin dimensions and variations in the number of fins on a displacer with aluminum material. This study uses an experimental method to describe the performance of the stirling engine prototype using various dimensions of cooling fins and variations in the number of fins. The results showed that the gamma stirling engine using 6 fins, and a diameter of 38 mm, showed the best results with a time of 43 minutes with an intensity of solar radiation of 188.2 W/m² to drive the stirling engine with a speed of 189 rpm and a torque of 0.87 N. mm. The difference in temperature produced in the hot cylinder and cold cylinder is 115˚C with a thermal efficiency of 44.13%.


 

Downloads

Download data is not yet available.

Article Details

How to Cite
Achyak, M., Suwandono, P., & Soebiyakto, G. (2022). Pengaruh Variasi Dimensi Sirip Pada Displacer Sistem Pendingin Mesin Stirling Menggunakan Energi Surya Terkonsentrasi. Jurnal Energi Dan Teknologi Manufaktur (JETM), 5(01), 35-42. https://doi.org/https://doi.org/10.33795/jetm.v5i01.114
Section
Articles

References

[1] D. Christian, “Karakteristik Motor Stirling Piston Bebas Berpendingin Udara Dengan Satu Pegas,” 2011.
[2] C. S. Vineeth, “Stirling Engines.,” C. Chart. Mech. Eng., vol. 29, no. 6, pp. 59–62, 2011, doi: 10.1201/9781315374192-14.
[3] Denny christian, “Karakteristik Motor Stirling Piston Bebas Berpendingin Udara Dengan Dua Pegas,” 2013.
[4] S. Sudirman, “Karakteristik Aliran Di Sekitar Silinder Sirkular Dan Silinder Bersirip,” Elem. J. Tek. Mesin, vol. 6, no. 1, p. 28, 2019, doi: 10.34128/je.v6i1.93.
[5] A. Zayyinun and M. Widyartono, “Prototipe Mesin Stirling Menggunakan Panas Sinar Matahari Sebagai Energi Alternatif,” Tek. Elektro, vol. 09, no. 2, pp. 459–466, 2020.
[6] G. A. dan A. N. A. Riyadi Prabowo Moecty, “Rekayasa Mesin,” Rekayasa Mesin. Rekayasa Mesin, 4(2), 147–156., vol. 4, no. 2, pp. 147–156, 2016, [Online]. Available: http://rekayasamesin.ub.ac.id/index.php/rm/article/view/193.
[7] D. W. Karmiadji, “Pengembangan Mesin Stirling Tipe Gamma Sebagai Tenaga Penggerak Kipas Angin,” 2019.
[8] I. P. Nazila, “Unjuk Kerja Mesin Stirling Tipe Gamma Dan Sistem Aliran Air Pada Reservoir Rendah,” 2016.
[9] E. M. Maula, “Sebagai Sumber Panas Mesin Stirling Tipe Gamma,” 2016.
[10] P. K. Purwadi, “Efisiensi sirip berbentuk silinder,” vol. 9, no. September, pp. 231–237, 2010.
[11] W. A. Widodo, T. Yuwono, P. Indiyono, and W. D. Aryawan, “Pengendalian Aliran Pasif Pada Silinder Sirkular Dengan Inlet Disturbance Body Berbentuk Silinder Elip (Ar = 1/4),” J. Tek. Mesin, vol. 11, no. 1, pp. 1–11, 2010, doi: 10.9744/jtm.11.1.pp.1-11.