ANALISIS PROPERTI BAHAN BAKAR MINYAK DARI PLASTIK LDPE (LOW DENSITY POLYETHYLENE) DAN PET (POLYETHYLENE TEREPHTHALATE) MENGGUNAKAN PROSES PIROLISIS ANALISIS PROPERTI BAHAN BAKAR MINYAK DARI PLASTIK LDPE (LOW DENSITY POLYETHYLENE) DAN PET (POLYETHYLENE TEREPHTHALATE) MENGGUNAKAN PROSES PIROLISIS

Main Article Content

Mietra Anggara Ajie Prana Mesa Bernadus Crisanto Putra Mbulu

Abstract

Plastic waste is an environmental problem that is hotly discussed in the era of globalization. Almost all people are starting to realize the dangers caused by environmental damage. The purpose of this study was to determine the properties of fuel oil resulting from the pyrolysis process for LDPE (Low Density Polyethylene) and PET (Polyethylene Terephthalate) plastics. The research method used is through experiments with the Pyrolysis process. In managing LDPE and PET plastic waste, namely the pyrolysis technique which can produce fuel oil. The types of plastic used in this study were LDPE plastic bags, garbage bags and PET juice plastic cups and mica plastic. This research was carried out using a temperature of 300 0C with a time of 1 hour and a mass of 1 kg of plastic to get different density results. The results showed that the plastic bag had an average value (density) of 0.929 g/mL, (viscosity) with an average of 0.565 m2/s and (Flash point) 410C, but the trash bag had an average (density) of 0.909 g/mL, (viscosity) with an average of 0.43 m2/s and (Flash point) 560C, then on plastic juice cups it has an average value (density) of 0.884 g/mL (viscosity) with an average of 0.575 m2/ s and (Flash point ) 350C, while mica plastic has an average density value of 1.074g/mL, (viscosity) with an average of 0.575 m2/s and (Flash point ) 420C. The results of pyrolysis of LDPE and PET plastic types are good fuels to use, namely pyrolysis fuel for PET plastic juice cups closer to premium, while the LDPE plastic type in the plastic bag category tends to be close to premium

Downloads

Download data is not yet available.

Article Details

How to Cite
Anggara, M., Mesa, A., & Putra Mbulu, B. (2022). ANALISIS PROPERTI BAHAN BAKAR MINYAK DARI PLASTIK LDPE (LOW DENSITY POLYETHYLENE) DAN PET (POLYETHYLENE TEREPHTHALATE) MENGGUNAKAN PROSES PIROLISIS. Jurnal Energi Dan Teknologi Manufaktur (JETM), 5(02), 1-10. https://doi.org/https://doi.org/10.33795/jetm.v5i02.138
Section
Articles

References

[1] Wati, F., F. Noer, & Novita. 2018. Usaha Kerajinan Limbah Plastik di Desa Nusa. Jurnal Ilmiah Mahasiswa Pendidikan Kesejahteraan Keluarga. 3(2): 10-26
[2] Karad, R.T., & S. Havalammanavar. 2017. Waste Plastic to FuelPetrol, Diesel, Kerosene. International Journal of Engineering Development and Research. 5(3): 641-645.
[3] Worm, B., H.K. Lotze, I. Jubinville, C. Wilcox, & J. Jambeck. 2017. Plastic as a Persistent Marine Pollutant. Annu. Rev.
Environ. Resour. 42: 1-26
[4] Anthony Djafar, “Produksi Sampah di NTB Capai 3.388 Ton Setiap Hari,” Gatra.com, 2019.
[5] H. Nufus and Z. Zuriat, “Sosialisasi Dampak Pencemaran Plastik Terhadap Biota Laut Kepada Masyarakat Di Pantai Lhok Bubon Aceh Barat,” J. Mar. Kreat., vol. 3, no. 2, pp. 7–13, 2020,
[6] D. Yudhantari, “Kandungan Mikroplastik pada Saluran Pencernaan Ikan Lemuru Protolan (Sardinella Lemuru) Hasil Tangkapan di Selat Bali,” J. Mar. Res. Technol., vol. 2, no. 2, p. 48, 2019,
[7] W. Trisunaryanti, U. G. M. Press, and G. M.
U. Press, Dari Sampah Plastik Menjadi Bensin Solar. UGM PRESS, 2018.
[8] W. S. Luing, “Cracking Of Low Density Polyethylene Dissolved In Benzene To Liquid Fuels Using Zeolite-Based Catalysts,” 2016.
[9] Hauli, L., K. Wijaya & A. Syoufian. 2019. Hydrocracking of LDPE Plastic Waste into Liquid Fuel over Sulfated Zirconia from a Commercial Zirconia Nanopowder. Oriental Journal Of Chemistry. 35(1): 128-133.

[10] Joko Santoso, 2010, Uji Sifat Minyak Pirolisis Dan Uji Performasi Kompor Berbahan Bakar Minyak Pirolisis Dari Sampah Plastik, Jurusan Teknik Mesin Fakultas Teknik Universitas Sebelas Maret ,
Surakarta
[11] Anggara, M., & Desiasni, R. (2019). Pengaruh Bentuk Permukaan Heat Absorber Plate terhadap Temperatur dan Waktu Pengeringan pada Solar Dryer Kemiri. TURBO , 8 , 28-32.
[12] Anggara, M., & Utami, SF (2020). Pengaruh Variasi Heat Absorber Plate terhadap Performa Solar Dryer Kemiri.
[13] Buwono, M., Nuryosuwito, N., & Setyowidodo, I (2020). Analisa Bahan Bakar Minyak Menggunakan Kondensor Bertingkat dan Pendingin Kompresi Uap. Jurnal Inovasi, Vokasional dan Teknologi. 17 (2); 75-88
[14] Sharuddin, S.D.A., F. Abnisa, W.M.A.W. Daud, & M.K. Aroua. 2016. A Review on Pyrolysis of Plastic Wastes. Energy Conversion and Management. 115: 308-326
[15] Dharma, U. S., & Irawan, D. (2015). Analisa Karakteristik Minyak Plastik Hasil Dua Kali Proses Pirolisis. Turbo: Jurnal Program Studi Teknik Mesin, 4(1).
[16] Biantoro, EW 2018. Analisa Karakteristik Bahan Bakar Minyak Dari Ban Dalam Bekas dan Plastik Jenis LDPE (Low Density Polyethilene). Dalam Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi) (Vol. 2, No. 1, hlm. 281-286).