RANCANG BANGUN ALAT PENGADUK SABUN CAIR BAHAN BAKU MINYAK SERAI WANGI

Main Article Content

Muhammad Zuber Alfansuri Alfansuri

Abstract

The process of making liquid soap from citronella oil is an interesting thing to know. This study aims to design, create, test and analyze the time and rpm rotation of the most efficient liquid soap mixer machine. Soap is an alkaline local salt (usually a potassium salt) of fatty acids, mainly containing C16 salt (palmitic acid) and C18 (stearic acid) but can also contain several carboxylates with lower atomic weights (Fessenden, 1994 and Ketaren, 1986). Traditionally, lemongrass is used as a flavor generator in food, drinks and traditional medicine (Wijayakusumah, 2002). Fragrant lemongrass is also used as a flavor generator used in spicy sauce, fried chili sauce, chili paste and fish sauce (Oyen, 1999). Data collection observed were device capacity, yield. From the results of the study, the effective capacity of the equipment was 397.1 L / hr.


 


Keywords: liquid soap, citronella oil, effective capacity of the tool, yield.

Downloads

Download data is not yet available.

Article Details

How to Cite
Zuber, M., & Alfansuri, A. (2020). RANCANG BANGUN ALAT PENGADUK SABUN CAIR BAHAN BAKU MINYAK SERAI WANGI. Jurnal Energi Dan Teknologi Manufaktur (JETM), 3(02), 33-38. https://doi.org/https://doi.org/10.33795/jetm.v3i02.60
Section
Articles

References

[1] Adi Santoso (2015) Rancang Bangun Mesin Pengaduk Adonan Donat. Surabaya, Faculty Of Industrial Technology, Institute Of Technology.
[2] Al Hakim, Muhammad Imam. 2015."Rancang Bangun Alat Pengaduk Sabun Cai Bahan Baku Minyak Jelantah" Program Studi Keteknikan Pertanian, Fakultas Pertanian Usu, Medan.
[3] Basuki, D. 2011. Aktifitas Antibakteri Ekstrak Etil Asetat Tanaman Serai (Cymbopogon nardus (L.) Rendle) Terhadap Escherichia coli Dan Staphy lococcus aureus Multiresisten Serta Bioautografinya. Jurusan Farmasi Fakultas Farmasi Universitas Muhammadiyah Surakarta.
[4] Drs, suryanto. 1995. Elemen mesin 1.Pusat pengembangan pendidikan, politeknik bandung, bandung.
[5] Efendi, A. (2013). PENGARUH JENIS PENGADUK HELICAL-RIBBON, DAN DAYUNG (PADDLE) TERHADAP HASIL PRODUK SABUN CUCI CAIR. Jurnal Teknik Mesin, 1(2), 336-343.
[6] Habni Amiludin, N. U. R. (2014). Analisa Rancang Bangun Mesin Pengaduk Bahan Baku Sabun Mandi Cair. Jurnal Rekayasa Mesin, 1(02).
[7] Iwan Wahyudi (2007) Rancang Bangun Mesin Pengaduk ( Mixer ) Bahan Olah Daging Bakso. Fakultas Teknologi Industri, Jurusan Teknik Mesin, Universitas Mercu Buana, Jakarta.
[8] Joseph E. Shigley, Larry D. Mitchell, Ir. Gandhi Harahap M.Eng, 1984, Perencanaan Teknik Mesin, Edisi Keempat, Jilid 2, Penerbit Erlangga, Jakarta.
[9] Muhamad Frengki Kirana Kusnandar. (2017) Rancang Bangun Dan Analisa Mesin Pengaduk Dodol Semi Otomatis Dengan Kapasitas 30 Kilogram. Yogyakarta, Fakultas Teknologi Industri Universitas Islam Indonesia, Jurusan Teknik Mesin
[10] Pondra A.S, 2012. Rancang Bangun Mesin Pengaduk Sabun Cuci. Laporan Tugas Akhir. Jurusan Teknik Mesin FT Unesa.
[11] Rahmad azly (2017) kumpulan ilmu pengetahuan umum untuk menghitung ratio putaran gearbox dan kapasitas.
[12] Septyayu Catur P, (2017) Rancang Bangun Mesin Pengaduk Mentega (Churner) Dengan Speed Control, Jurusan Teknik Mesin, Universitas Negeri Semarang, Semarang.
[13] Setyo Gunawan, (2015) Perancanagan Dan Analisis Chassis Mobil Listrik”Semut Abang” Mengunakan Sofware Autodesk Inventorpro 2013, Jurusan Teknik Mesin, Institut Teknologi Adhi Tama Surabaya, Surabaya.
[14] Shigley, Joseph E, and Matchell, Larry D, 1994, Perencanaan Teknik Mesin, terjemahan Gandhi harahap, penerbit Erlangga, Jakarta.
[15] Supadi, HS. (1998). Elemen mesin 1, Surabaya: Unesa University Press.
[16] Sularso., Sugo Kiyokatsu. 2002. Dasar Perencanaan dan Pemilihan Elemen Mesin. Pradnya Paramita, Jakarta.
[17] Sularso., Sugo Kiyokatsu. 2008. Dasar Perencanaan dan Pemilihan Elemen Mesin. Pradnya Paramita, Jakarta.
[18] Yogasmara Qorianjaya, (2017) Perancangan Pulley Dan Sabuk Pada Mesin Mixer Garam Bleng. Teknik Mesin, Universitas Surakarta, Surakarta
[19] Zainul Achmad. 1999. Elemen Mesin I. Refika Aditama, Bandung.